Pool care and accessories
Filter
- Brand(100)
- INTEX(100)
- Popo(100)
Filter Sort by: Relevance
Sort by
Pool cover 305cm (height 25 cm)
The size of the lid is 305 cm, and the protrusion is 25 cm. It has a rope for fastening. The lid is equipped with drainage holes to prevent water accumulation.
Pool cover 300x200 cm
The cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. It is designed for INTEX Rectangular Frame 300x200 cm frame pools. The cover is made of durable PVC, resistant to mechanical influences. It is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool. The dimensions of the case range from 300x200 cm and a protrusion of 20 cm. Package dimensions 23 x 25 x 8 cm. The kit includes a blanket and a rope for attaching it.
The cover for the pool 260*160 cm rectangular INTEX
The cover is designed for frame pools with a size of 260x160cm. it has a fastening rope and drainage holes. the protrusion of the edges of the cover is 20 cm. The package dimensions are 20x17x10 cm. The color is dark blue. weight 1.75 kg. Manufacturer-Intex company.
Pool cover 4 x 2 m
The cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. It is designed for INTEX frame pools. The case is made of durable PVC, resistant to mechanical influences. It is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool frame. The dimensions of the case are 389x184 cm, and the ledge: 20 cm.
Pool cover 457cm (height 25CM)
The size of the lid is 457 cm, and the protrusion is 25 cm. It has a rope for fastening. The lid is equipped with drainage holes to prevent water accumulation.
Pool cover, 366cm
This pool cover protects the water from debris and dust. Suitable for Easy Set pools with a diameter of 366 cm. The cover is attached with a rope under an inflatable loop. Drainage holes prevent water accumulation. Weight: 3.3 kg. Package Dimensions(RLH): 57*29*32 cm.
Pool cleaning kit
Intex's complete luxury pool cleaning kit includes highly effective accessories to keep the water, floor and walls clean. The kit includes a hose for connection to the filter pump. To use the Intex cleaning kit #28003, a filter pump with a water flow rate of at least 3785 l/h is required. The kit includes a telescopic rod, a mesh for collecting debris from the surface of the water, a brush, a flat vacuum nozzle connected to a filter pump, a connecting adapter for connecting a hose and a vacuum vessel to the pump inlet valve., a fine-mesh polymer mesh that allows you to filter even small particles. dirt from the floor and walls is sucked up using a vacuum nozzle connected to a filter pump with a capacity of at least 3785 l/ h. the garbage remains in a special compartment, a container for filtering garbage, and water passes through the filter back into the pool. two nozzles, a brush and a vacuum nozzle, are attached to a lightweight telescopic aluminum handle with a length of 279 cm, which provides access to any point of the pool. the length of the hose is 7.5 meters (adjustable). the kit is designed for pools with a diameter of more than 4 meters: Package dimensions: 113 x 30 x 13 cm. weight 3.7 kg.
Pool cover, 244cm
The cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. It is designed for INTEX EASY SET Pool inflatable pools with a diameter of 244 cm. The cover is made of durable PVC, resistant to mechanical influences. It is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool. The product size is 244 cm, the package size is 23 x 25 x 8 cm. The kit includes a blanket and a rope for attaching it.
Pool cover, 305cm
The Intex 28021 cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. The case is designed for INTEX EASY SET Pool inflatable pools with a diameter of 305 cm. It is made of durable PVC, resistant to mechanical stress. the cover is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool product size: 305 cm, ledge: 30 cm, Package dimensions: 10 x 25 x 23 cm. The set includes: a blanket, a rope for attaching a blanket.
Pool cover 366cm
The cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. It is designed for INTEX frame pools with a metal frame with a diameter of 366 cm. The cover is made of durable PVC, resistant to mechanical influences. It is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool frame. The size of the case is 366 cm, and the protrusion is 25 cm. Package dimensions are 30 x 26 x 11 cm. The kit includes a case and a rope for attaching it.
The cover for the pool
The cover protects the pool from dust, dirt and leaves, keeping the water clean. It is recommended to cover the pool when it is not in use. It is designed for INTEX EASY SET Pool inflatable pools with a diameter of 396 cm. The cover is made of durable PVC, resistant to mechanical influences. it is attached to the pool with a special rope that runs along the edge of the cover. The cover has drainage holes to prevent water accumulation and excessive load on the pool. The size of the case is 396, the height is 30 cm, and the protrusion is 30 cm. The kit includes a blanket and a rope for attaching it.
Pool chemical, PH minus sand 5kg CH PH minus Granulat
This product is designed to reduce the pH level of the pool water. it is made on the basis of sodium hydrogen sulfide and is designed to bring the pH to an ideal level of 7.0-7.4. The product can also be used as a detergent against dehydration. Basic properties: it dissolves quickly and without residue, does not contain chlorides, remains dry for a long time, suitable for both manual and automatic processing. To use, dissolve the pH minus in water (not vice versa). 150 grams will reduce the pH of the water by 10 m3. In the case of hard water, the dose should be increased. Check the pH level regularly. Do not spill near metal objects. Keep it tightly closed. 1 measure is equal to 180 grams. The ideal chlorine level is 0.6-1.0. to remove limescale, dissolve 200 g of granules in 2 liters of water, treat the surface, and then rinse. Please note that overdose can lead to metal corrosion. follow the safety instructions. Store in a cool, sun-protected place in the original packaging, out of the reach of children. store at a temperature above 0°C. The shelf life is 5 years. Store and store empty and washed containers can be disposed of. Do not mix with other chemicals.
Pool cleaning liquid CHEMOFORM Compactal 1L
This acid-based detergent is intended for use in outdoor pools. It contains 10 to 25% hydrochloric acid and less than 10% phosphoric acid. The product is effective for thorough and general cleaning of the pool and its surroundings. It easily removes stubborn stains, wear deposits, rust and other mineral deposits. The product has a high concentration and should be used only in a diluted form. It does not damage chlorinated rubber paints, synthetic resins and plastics. To use, dilute the compact with water, depending on the type and degree of contamination. Apply to a dirty surface, leave on for 5-10 minutes, repeat the operation if necessary. For large surfaces, it is recommended to divide it into square sections. Beware of acid-sensitive materials such as marble, enamel, chrome and steel. In case of heavy pollution, use 3.5 liters per 10 liters of water and 1.0 liters for normal pollution. follow the safety instructions. Store in a cool, sun-protected place in the original packaging, out of the reach of children. Store at a temperature above 0 °C. The shelf life is 3 years. Store and transport in an upright position. Empty and washed containers can be disposed of. Do not mix with other chemicals.
A plastic can of chlorine
Intex 29040 floating dispenser with a diameter of up to 2.5 cm for slow-dissolving tablets. Prevents the deposition of chemicals on the bottom, which significantly extends the service life of the pool. Adjustable holes allow you to dose the concentration of chemicals. It has a lockable swivel cover. Made of high-strength plastic. It is recommended for PureSpa™ spas and pools up to 305 cm in diameter. The diameter of the dispenser is 12.7 cm. Designed for dispensers with a diameter of up to 2.5 cm tablets are not included.
Pool cover
The Intex 58920/28023 cover for a round inflatable pool with a diameter of 457 cm prevents dirt from entering the pool, keeping the water clean for a long time. Protects the pool from discoloration by sunlight.
Pool chemical, chlorine 5kg fine sand CH T-65 Granulat 56%
These chlorine granules are designed to disinfect pool water, and are an effective solution to maintain the cleanliness and safety of pool water. The granules contain 50% active chlorine and have a stabilized formula. They dissolve quickly without residue, have a neutral pH and are suitable for hard water. They are resistant to the sun and heat. For long-term disinfection, use 35 g per 10 m3 of water every 3-6 days. For primary treatment, 80-100 g per 10 m3 of water is required. add the solution to the pool: It is recommended to apply in the evening after pH adjustment. The ideal chlorine level is 0.6-1.0, and the pH level is 7.0-7.4. For safety reasons, store in a cool, dry place, away from the sun and children. do not mix with other chemicals. store at a temperature above 0 °C. The shelf life is 5 years. suitable for small private pools. Use with caution, following the safety instructions.
Pool cleaning liquid algaecide 5L container Alba Super K
This acid-based detergent is intended for use in outdoor pools. It contains 10 to 25% hydrochloric acid and less than 10% phosphoric acid. The product is effective for thorough and general cleaning of the pool and its surroundings. It easily removes stubborn stains, wear deposits, rust and other mineral deposits. The product has a high concentration and should be used only in a diluted form. it does not damage chlorinated rubber paints, synthetic resins and plastics. To use, dilute the compact with water, depending on the type and degree of contamination. Tpply to a dirty surface, leave on for 5-10 minutes, in the case of large surfaces, it is recommended to divide it into square sections. Beware of acid-sensitive materials such as marble, enamel, chrome and steel. In case of heavy pollution, use 3.5 liters per 10 liters of water and 1.0 liters for normal pollution. Follow the safety instructions. Store in a cool, sun-protected place in the original packaging, out of the reach of children. store at a temperature above 0 °C. The shelf life is 3 years. Store and transport in an upright position. Empty and washed containers can be recycled. Do not mix with other chemicals.
A plastic can of chlorine
The cartridge "N" for the filter pump 28602. Holds tablets up to 7.6 cm in diameter. Made of durable plastic. the ability to adjust the supply of Honi chemicals, lockable lid. Designed for pools with a diameter of 366 cm or more. Tablets are not included in the package․
Pool cleaning liquid CHEMOFORM Randklar Lichid 1L
It is an acid-based detergent for outdoor pools. It is made using 10-25% hydrochloric acid and less than 10% phosphoric acid. The product is effective for thorough and general cleaning of the pool and its surroundings. It easily removes stubborn stains, removes wear deposits, rust and other mineral deposits. The product has a high concentration, and it should be used only in a diluted form. It does not destroy paints on chlorinated rubber, synthetic resins and plastics. To use, dilute with water depending on the type and degree of contamination, for large surfaces, it is recommended to divide into square sections. Beware of acid-sensitive materials such as marble, enamel, chrome and steel. In case of heavy pollution, use 3.5 liters per 10 liters of water and 1.0 liters for normal pollution. Follow the safety instructions. Store in a cool, sun-protected place in the original packaging, out of the reach of children. Store at a temperature above 0 °C. The shelf life is 3 years. Empty and washed containers can be recycled. do not mix with other chemicals.
Pool chemical, chlorine fine sand 10kg container SZI Granulat
This preparation in the form of chlorine granules is a means for disinfection and strong chlorination of pool water. It is made on the basis of sodium dichloroisocyanurate and contains more than 50% active chlorine. It is intended for disinfection of pool water and is especially recommended for small private pools. The product consists of granules of stabilized chlorine, pH neutral, dissolve quickly and without residue. It is safe to use with chlorine, suitable for hard water and resistant to sunlight and heat․ Before use, dissolve the granules in water by adding the granules to the water, and not the other way around. The initial treatment requires 80-100 g of granules per 10 m3 of water. For long-term chlorination, 35 g of the drug is required every 3-6 days per 10 m3 of water. Do not throw the pellets directly into the pool due to the risk of discoloration of the materials. It is better to carry out the treatment in the evening after adjusting the pH level. The ideal chlorine level is 0.6-1.0, and the ideal pH level is 7.0-store in a cool, sun-protected place in the original packaging, store at a temperature above 0°C. The shelf life is 5 years. Store and transport in an upright position. Empty and washed containers can be disposed of.
Pool cleaning liquid CHEMOFORM Sauna Clean 1L
For the effective operation of the filtration system, it is important to avoid condensation of the filter material and correctly determine its properties. It is recommended to use only one type of granules-one granulometrically curved-for a filter of any size. it is desirable to obtain multi-faceted, non-porous and harmless particles without sharp edges. It is important to keep all micro-holes of the filter media open, avoiding clogging inside the filter and maximizing the ability to retain dirt. This approach allows you to reduce the consumption of chemicals used for water care․ The granulometric curve of the first stage was constructed in order to optimize the maximum content of pollutants in the filter, minimizing the need for backwash. It also aims to make the backwash process extremely efficient and minimize pressure loss in the filter, resulting in lower pump flow. The ultimate goal is to optimize the quality of filtration, taking into account all of the above prerequisites․
Pool chlorine 1kg fine sand CHEMOFORM T-65
Kemoclor T-65 is a chlorine pellet designed for disinfection and chlorination of water in swimming pools. It is made of sodium dichloroisocyanurate dihydrate and contains 50% chlorine action. This effective product is especially suitable for water purification in private and small pools. stabilized chlorine granules have a neutral pH, dissolve quickly without residue, are suitable for hard water and are resistant to sunlight and heat. To use, you must first dissolve the granules in water, and then add the solution in the pool: It is strictly forbidden to add dry granules directly into the pool water. The primary treatment requires 80-100 grams per 10 m3 of water. For long-term disinfection, use 35 grams per 10 m3 of water every 3-6 days. It is recommended to carry out the treatment in the evening after adjusting the pH level. The ideal chlorine level should be 0.6-1.0, and the pH level should be 7.0-7.4. For safety reasons, store the products in their original packaging, in a cool and sun-protected place. Keep out of reach of children and with chemicals, because this can lead to the release of toxic gases and explosion hazards. Store at temperatures above 0°C. The shelf life is 5 years. store and move the product only in an upright position. Empty and washed containers can be disposed of. Use with caution, following all safety instructions. For more information, please refer to the product label and safety data sheet.
Pool step 1
Intex pool steps are an indispensable accessory for your frame and inflatable pools with edge heights of 76, 91 and 107 cm. It has a solid metal base coated with a special powder paint, which ensures a long service life. the height of the step is 107 cm. It is easy and quick to install. There is a wide enough angle between the sides so that you do not touch the walls of the pool and can easily get into it. The frame is made of metal, and the steps are made of durable plastic. The ladder legs have special ones that protect the bottom of the pool from injury.
Sand filter-pump combined with chlorine generator
This high-quality system combines a chlorogenerator and a sand filter pump, providing comprehensive cleaning and disinfection of pool water. It is designed for pools with a volume of up to 56.8 m3. The sand filter pump has a capacity of 10,000 l/h and provides water purification and circulation. It is controlled by a six-position valve. The capacity of the sand filter is 410 mm in diameter and requires 38 kg of sand. The chlorine generator, also known as the Krystal Clear Marine water supply system, produces about 11 g/h of chlorine using ordinary table salt or salt in tablets. It prevents the proliferation of algae and bacteria by providing clean and transparent water that does not irritate the skin and eyes. The device is equipped with a touch-sensitive control panel with the ability to lock. It offers various operating modes, including an automatic operation timer, water pressure and flow control, a self-diagnosis and automatic shutdown system, as well as three self-cleaning modes. the system operates at a voltage of 220-240 V and is equipped with a 0.75 hp motor. Quartz or glass sand with a fraction of 0.8 can be used in it. The connection is threaded, with a diameter of 38 mm, and the kit includes the appropriate hose. The total weight of the equipment is 29.5 kg, and the package dimensions are 71.8 x 68.9 x 42.2 cm. This system is especially recommended for INTEX Ultra Frame rectangular pools with a size of 975x488 cm.
- 1
- 2
- 3
- 4
- 5
